FACP
Manuals
Resource Center
Tools
Ask AI
Sign In
Ask AI
Sign In
Home
•••
Resources
Trouble Codes
Notifier
Nfs 320
Co Monitor
Resource Center
Browse
Home
Questions
252
Trouble Codes
688
Panels
24
Panel Specs
24
Learn
NFPA 72-2025
Community
Community Wall
Tools
Ask AI
CO Monitor: NFS-320 Trouble Code | Fire Alarm Resource Center
CO Monitor
supervisory
Notifier NFS-320
63 views
·
0 field notes
What This Code Means
Indicates activation of a CO conventional detector connected to a monitor module.
Common Causes
1
Carbon monoxide detected
2
Detector activation
Resolution Steps
Investigate the area for carbon monoxide and reset the panel once the condition is cleared.
Manual References
(2)
1
notifier
NFS-320
Operations
2011
p. 21, 68, 70, 5
Open
2
notifier
NFS-320C
Datasheet
2017
Open
Getting CO Monitor on your NFS-320?
Ask TroubleShooter AI for help
→
Field Notes
Loading field notes...
Sign in
to share a field note
Related Codes
LO VAL
The detector chamber reading is too low or internal elements are failing.
BAT.BACKUP RAM
The RAM battery backup voltage is low.
PRLOSS
The output module or new sounder base lost power.
INVREP
The device has returned a response to the panel that the panel did not recognize.
System Reset
A system command or status message indicating the control panel is clearing all active inputs, interrupting resettable power, and decoupling from the network for 60 seconds.
Related Questions
What are the main differences between the NFS-320 and the NFS2-640?
What are the NAC circuit specifications for the NFS-320, and how does the shared 6-amp power supply limit total NAC loading?
What batteries does the NFS-320 use, and when is an external battery box required?