FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
System Resetmaintenance

Notifier NFS-320: System Reset

Notifier NFS-320·0 views·0 field notes

What This Code Means

A system command or status message indicating the control panel is clearing all active inputs, interrupting resettable power, and decoupling from the network for 60 seconds.

Common Causes

  • 1Manual activation of the SYSTEM RESET key by an operator
  • 2Remote System Reset command via a monitor module
  • 3Attempting to return the panel to normal operation after correcting an alarm or trouble condition

Resolution Steps

Press the SYSTEM RESET key on the panel keypad to clear active inputs and reset the system. Ensure all alarm or trouble conditions are corrected beforehand, as the panel will reactivate NACs and indicators if conditions persist after the reset.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

Photo/CO (P Sup)Indicates activation of the Photo element of a detector, which triggers the SUPERVISORY LED.Low Chamber valueThe detector chamber value has dropped below the allowed limit.Photo/COIndicates activation of the Photo, Heat, or CO element of a detector.Photo/CO (C Sup)Indicates activation of the CO element of a detector, which triggers the SUPERVISORY LED.Maintenance AlertIndicative of dust accumulation that is near but below the allowed limit.

Related Questions

How does the NFW2-100 ground fault detection work?What battery size does the NFW2-100 require, and how do I silence a battery trouble condition after replacement?What batteries does the NFS-320 use, and when is an external battery box required?
All NFS-320 trouble codesNFS-320 panel page