NO POWER SUPPLY INSTtrouble

Notifier NFS2-3030: NO POWER SUPPLY INST

Notifier NFS2-3030·0 views·0 field notes

What This Code Means

The address of the main power supply (AMPS-24) has not been correctly entered in programming.

Common Causes

1Incorrect AC fail address
2Power supply not configured for Trouble Reporting
3Incorrect MOD TYPE or FLASHSCAN settings

Resolution Steps

Correct the power supply programming. Ensure MOD TYPE=Monitor and TYPE CODE=Power Monitor.

Manual References(3)

1notifierNFS-3030Programming2003Open

2notifierNFS-3030Operations2003Open

3notifierNFS2-3030Operations2016p. 30Open

Field Notes

Loading field notes...

Sign in to share a field note

Related Codes

CLASS A FAULTA wireless device is missing its redundant Class A connection.STYLE 6 POS LOOP xA short circuit exists on the positive side of SLC loop x.STYLE 4 SHORT x LOOP xA short circuit has been detected on a Style 4 SLC loop.MANUAL MODE ENTEREDAn annunciator has been manually placed into a non-normal mode.TAMPERA monitor module point programmed with this Type ID code has activated, typically indicating that the module is connected to a tamper switch that has been triggered.

Related Questions

How does the NFW2-100 ground fault detection work?What battery size does the NFW2-100 require, and how do I silence a battery trouble condition after replacement?What batteries does the NFS-320 use, and when is an external battery box required?

All NFS2-3030 trouble codes NFS2-3030 panel page