Point disabled: 5820XL Trouble Code | Fire Alarm Resource Center

What This Code Means

A point or circuit has been manually deactivated, preventing it from initiating or responding to alarms.

Common Causes

1Manual user action to disable a point or circuit
2Maintenance or testing procedures

Resolution Steps

Press 1 for Disable / Enable point. Select the module where the point you want to disable/enable is located. Enter the point or circuit number that you want to disable/enable. Press [>] key to toggle between NORMAL (enable) or DISABLE.

Manual References(5)

1silent knight5820XLInstallation2007Open

2silent knight5820XL-EVSOperations2013Open

3silent knight5820XLDatasheet2006Open

Related Codes

Detector troubleA smoke or heat detector is reporting a fault condition to the panel.Water flow switch troubleA fault has been detected in the wiring or switch of a water flow initiation circuit.BATTERY LOWThe system has detected that the standby battery voltage is below the acceptable threshold, indicating the batteries are depleted or failing to hold a charge.System Power (Flashes)The panel has lost primary AC power and is running on battery backup.GROUND FAULTAn earth ground fault occurs when the panel senses an unexpected flow of current from one or more of its terminals to the earth connection (Terminal 2).

Silent Knight 5820XL

What This Code Means

Common Causes

Resolution Steps

Manual References(5)

Field Notes

Related Codes

Related Questions