SUPERVISORYsupervisory

Silent Knight 5820XL: SUPERVISORY

Silent Knight 5820XL·1 view·0 field notes

What This Code Means

The system detects a supervisory condition, which indicates that a monitored device like a tamper switch or duct detector is in an off-normal state.

Common Causes

1Supervisory/Tamper switch activation
2Supervisory duct detector activation
3CO Supervisory Condition
4Water flow switch activation

Resolution Steps

Press the down arrow to view the specific supervisory condition. Press SILENCE and enter an access code (or activate the key) to silence the annunciator. Once the supervisory condition has been corrected, the system will restore itself automatically.

Manual References(5)

1silent knight5820XLInstallation2007Open

2silent knight5820XLDatasheet2006Open

3silent knight5820XLDatasheet2006Open

Field Notes

Loading field notes...

Related Codes

Printer offlineThe system printer is not communicating with the control panel.SLC Class A supervision lostThe panel has lost the return path for a Class A SLC loop configuration.GROUND FAULTAn earth ground fault occurs when the panel senses an unexpected flow of current from one or more of its terminals to the earth connection (Terminal 2).Point disabledA specific point or circuit has been manually taken out of service, preventing it from initiating an alarm or activating an output.BATTERY LOWThe system has detected that the standby battery voltage is below the acceptable threshold, indicating the batteries are depleted or failing to hold a charge.