Fire-Lite

MS-9200UDLS

The Fire-Lite MS-9200UDLS is an addressable fire alarm control panel supporting 1 SLC loop with up to 318 devices. One of the most popular mid-size panels in the US market.

7 manuals51 trouble codesModels: MS-9200UDLS, MS-9200UDLSE

Specifications

SLC Loops

1

Panel Type

Addressable

NAC Circuits

4 Class B / 2 Class A

Total Points

318 (LiteSpeed) / 198 (CLIP)

Points/Loop

318 (LiteSpeed) / 198 (CLIP)

Battery (Ah)

7-26

Annunciator

Yes

Manuals

MS-9200UDLS

InstallationOperationsProgramming2015

MS-9200UDLS

InstallationOperationsProgramming2005

SLC

Trouble Codes

View all 51 →

24 HOUR ABNORMAL TESThe automatic 24-hour communicator test failed or was attempted while the system was in an off-normal state.AC_FAILThe control panel has lost its primary AC power source.AC LOSSThe panel has detected that the primary AC power has dropped too low or failed, causing the AC POWER indicator to extinguish and the system trouble indicator to activate.

Related Questions

What does INVREP trouble mean on the MS-9200UDLS and how do I resolve it?How do I perform a walk test on the MS-9200UDLS?How do I troubleshoot a ground fault on the MS-9200UDLS?What does UDLS mean on the MS-9200UDLS and how does the built-in communicator work?

All Fire-Lite manuals →All MS-9200UDLS trouble codes →Ask TroubleShooter AI →

Installation2019

MS-9200UDLS, MS-9200UDLSE and MS-9200UDLSC (Spanish)

InstallationOperationsProgramming2010

Manuals That Reference This Model (22)

ECC-50/100 and ECC-50/100EInstallationOperationsProgramming2014 ACC-25/50InstallationOperationsProgramming2010 ES-200X SeriesDatasheet2023 BG-12LXDatasheet2012 Device Compatibility DocumentCompatibility Chart2022 Document ChartManual2017 ECC-50/100Datasheet2018 ECC-FFTDatasheet2015 ANN-I/ODatasheet2018 VisorALARM PLUS 2UInstallation2007 W-MMF & W-CRFDatasheet2018 ECC-50/100C Command CtrDatasheet2015 Central Station TransmitterInstallation2006 IPDACT-2/2UD CommunicatorDatasheet2014 PRN-7Installation2015 W-GATEDatasheet2018 IPDACTInstallationOperations2007 W-BG12LX and W-BG12LXSPDatasheet2018 ANN-LCDatasheet2015 ES-200XDatasheet2018 CMF-300-6Datasheet2015 ANN-RLYDatasheet2018

ACS FAULT

Communication failure with an ACS Annunciator device.

ACTIVE SUPERVISORYSupervisory operation indicates a condition that is similar to an alarm but typically monitors system components like sprinkler valves or pressure switches to ensure they are in their normal state.

ALARM SILENCEDThis condition indicates that the Notification Appliance Circuits (NACs) have been silenced by pressing the Alarm Silence key while an alarm condition exists.

Battery FaultA general fault related to the system standby batteries.

CHARGER FAULTThe internal battery charging circuit is not operating within normal parameters.

COMM FAULT 1 / COMM FAULT 2Indicates a communication failure between the panel's internal Digital Alarm Communicator/Transmitter (DACT) and the central station.

COMM FAULT 1The communicator failed to successfully transmit a report to the central station using line 1.

How do I add a remote annunciator to the MS-9200UDLS?