FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
ACS FAULTtrouble

Fire-Lite MS-9200UDLS: ACS FAULT

Fire-Lite MS-9200UDLS·1 view·0 field notes

What This Code Means

Communication failure with an ACS Annunciator device.

Common Causes

  • 1Wiring fault on the ANN-bus
  • 2Incorrect annunciator address
  • 3Loss of power to the annunciator

Resolution Steps

Check the ANN-bus wiring for opens or shorts. Verify that each annunciator has a unique and correct address programmed.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

REMOTE SYNC FAULTA fault has been detected on the remote synchronization output circuit.POWER MONA monitor module assigned to power monitoring has detected a loss of power.NAC_KEY_FLTA fault related to the internal NAC activation logic or hardware.TELCO LINE 2The panel has detected a loss of voltage or failure on telephone line 2.PROCESS MONA monitor module assigned to process monitoring has been activated.

Related Questions

How do I set zone types on the MS-5024?What is the maximum SLC loop capacity of the MS-5024, and which Fire-Lite detectors and modules are compatible?How do I troubleshoot a Loop Fault or SLC Communication Failure on the MS-5024?
All MS-9200UDLS trouble codesMS-9200UDLS panel page