FACP
Manuals
Resource Center
Tools
Ask AI
Sign In
Ask AI
Sign In
Home
•••
Resources
Trouble Codes
Fire Lite
Ms 9200udls
Telco Line 1
Resource Center
Browse
Home
Questions
252
Trouble Codes
688
Panels
24
Panel Specs
24
Learn
NFPA 72-2025
Community
Community Wall
Tools
Ask AI
TELCO LINE 1: MS-9200UDLS Trouble Code | Fire Alarm Resource Center
TELCO LINE 1
trouble
Fire-Lite MS-9200UDLS
152 views
·
0 field notes
What This Code Means
The panel has detected a loss of voltage or failure on telephone line 1.
Common Causes
1
Cut phone line
2
Phone company service outage
3
Loose RJ31X connector
Resolution Steps
Verify the presence of dial tone and voltage on the phone line. Check the connection between the panel and the telephone block.
Manual References
(3)
1
fire-lite
MS-9200UDLS
Installation
2005
p. 110, 153, 108
Open
2
fire-lite
MS-9200UDLS Rev 2
Datasheet
2009
Open
3
fire-lite
MS-9200UDLS Rev 3
Datasheet
2010
Open
Getting TELCO LINE 1 on your MS-9200UDLS?
Ask TroubleShooter AI for help
→
Field Notes
Loading field notes...
Sign in
to share a field note
Related Codes
NAC 3 FAULT
A fault condition (open or short) has been detected on Notification Appliance Circuit 3.
COMM FAULT 1
The communicator failed to successfully transmit a report to the central station using line 1.
COMM FAULT 1 / COMM FAULT 2
Indicates a communication failure between the panel's internal Digital Alarm Communicator/Transmitter (DACT) and the central station.
NAC 4 FAULT
A fault condition (open or short) has been detected on Notification Appliance Circuit 4.
REMOTE SYNC FAULT
A fault has been detected on the remote synchronization output circuit.
Related Questions
What does INVREP trouble mean on the MS-9200UDLS and how do I resolve it?
How do I perform a walk test on the MS-9200UDLS?
How do I troubleshoot a ground fault on the MS-9200UDLS?
