AC Failuretrouble

Kidde FX-5: AC Failure

Kidde FX-5·0 views·0 field notes

What This Code Means

The control panel has lost primary AC power.

Common Causes

1Tripped building circuit breaker
2Blown AC fuse in the panel terminal block
3Local utility power outage

Resolution Steps

Verify the building circuit breaker is ON. Check the 5A fuse located in the AC terminal block inside the panel. Measure the AC input voltage at the panel terminals.

Manual References(2)

1kiddeFX-5 and FX-10Installation2017p. 34, 65, 86, 113, 111, 3, 59, 64Open

2kiddeFX-5 and FX-10 SeriesOperating Instructions2017p. 1Open

Field Notes

Loading field notes...

Related Codes

Transformer 2 TRThe panel detected a trouble condition in the Power Expander Transformer.Supervisory zone activeA device on a supervisory circuit (such as a tamper switch) has been activated.Ground FaultThe panel detected an unintended electrical path between the system wiring and earth ground.DACT Configuration TRBLThe F-DACT1(F) dialer is either not programmed or contains unverified configuration changes.RRM(s) disabledOne or more FSRRM24 remote relay modules have been manually disabled.