FX-5 Trouble Codes

The control panel has lost primary AC power.

The panel detected a trouble condition in the auxiliary power circuit.

The standby battery has failed a load test and is no longer reliable.

The panel does not detect a battery connected to the charging circuit.

The panel detected a fault in the battery charging circuit.

The F-DACT1(F) dialer is either not programmed or contains unverified configuration changes.

The dialer failed to successfully deliver a message to the central monitoring station receiver.

A ground fault or line fault has been detected on Phone Line 1 of the dialer.

A ground fault or line fault has been detected on Phone Line 2 of the dialer.

The off-premises communicator (DACT) has been disabled.

The panel detected an unintended electrical path between the system wiring and earth ground.

An Initiating Device Circuit has been manually disabled by the user.

The panel has lost communications with the F-DACT1(F) dialer module.

A Notification Appliance Circuit has been manually disabled.

A Notification Appliance Circuit (NAC) has a wiring fault.

The control panel has lost communications with its peripheral devices.

One or more FSRRM24 remote relay modules have been manually disabled.

A device on a supervisory circuit (such as a tamper switch) has been activated.

The system has logged an abnormal condition during a test procedure.

The panel detected a trouble condition in the Power Expander Transformer.

A waterflow switch has activated, indicating water is moving in the sprinkler system.

An Initiating Device Circuit (IDC) is in a trouble state, typically due to a wiring fault.