FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
DACT Configuration TRBLtrouble

Kidde FX-5: DACT Configuration TRBL

Kidde FX-5·0 views·0 field notes

What This Code Means

The F-DACT1(F) dialer is either not programmed or contains unverified configuration changes.

Common Causes

  • 1New installation not yet configured
  • 2Incomplete programming session
  • 3Memory corruption

Resolution Steps

Enter the dialer programming mode. Review all account and system settings, then save and verify the configuration to clear the trouble.

Manual References(2)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

Ground FaultThe panel detected an unintended electrical path between the system wiring and earth ground.Battery BadThe standby battery has failed a load test and is no longer reliable.RRM(s) disabledOne or more FSRRM24 remote relay modules have been manually disabled.DACT Delivery TRThe dialer failed to successfully deliver a message to the central monitoring station receiver.Supervisory zone activeA device on a supervisory circuit (such as a tamper switch) has been activated.

Related Questions

How do I configure the Kidde FX-10 to pair IDC zones for Class A wiring?What is the difference between Abort Mode 1 (UL 864) and Abort Mode 3 (IRI) on the Aegis 2.0?How do I set up zone-specific NAC activation on the FX-10 so that only certain horns/strobes activate for specific zones?
All FX-5 trouble codesFX-5 panel page