ANNUN x NO ANSWER

trouble

Notifier NFS2-3030

57 views·0 field notes

What This Code Means

The annunciator at the specified address (x) is not responding to the control panel.

Common Causes

1Wiring fault between panel and annunciator
2Annunciator power loss
3Incorrect address settings

Resolution Steps

Check the wiring and power to the annunciator at address x. Verify the address settings on the annunciator hardware.

Manual References(1)

1notifierNFS2-3030Operations2016p. 30Open

Field Notes

Loading field notes...

Sign in to share a field note

Related Codes

NO POWER SUPPLY INSTThe address of the main power supply (AMPS-24) has not been correctly entered in programming.PROGRAM CORRUPTEDThe panel's programming database is corrupt.STYLE 6 POS LOOP xA short circuit exists on the positive side of SLC loop x.NCM COMM LOSSCommunication is lost between the CPU-3030 and the Network Communications Module (NCM).TAMPERA monitor module point programmed with this Type ID code has activated, typically indicating that the module is connected to a tamper switch that has been triggered.

Related Questions

What is the maximum SLC loop and device capacity of the NFS2-3030, and how does it expand beyond one loop?I'm getting AUXILIARY TROUBLE on my Notifier NFS2-3030. What should I check?What does 'NO ANSWER on Loop X' mean on the NFS2-3030 and how do I diagnose it?

All NFS2-3030 trouble codes NFS2-3030 panel page