BEAM BLOCKED

trouble

Notifier NFS2-3030

69 views·0 field notes

What This Code Means

The path between a beam detector and its reflector is obstructed.

Common Causes

1Object blocking beam
2Dirty lens/reflector
3Detector misalignment

Resolution Steps

Investigate the detector location and clear any physical blockages.

Manual References(1)

1notifierNFS2-3030Operations2016p. 30Open

Field Notes

Loading field notes...

Sign in to share a field note

Related Codes

NO POWER SUPPLY INSTThe address of the main power supply (AMPS-24) has not been correctly entered in programming.PROGRAM CORRUPTEDThe panel's programming database is corrupt.STYLE 6 POS LOOP xA short circuit exists on the positive side of SLC loop x.NCM COMM LOSSCommunication is lost between the CPU-3030 and the Network Communications Module (NCM).TAMPERA monitor module point programmed with this Type ID code has activated, typically indicating that the module is connected to a tamper switch that has been triggered.

Related Questions

What is the maximum SLC loop and device capacity of the NFS2-3030, and how does it expand beyond one loop?I'm getting AUXILIARY TROUBLE on my Notifier NFS2-3030. What should I check?What does 'NO ANSWER on Loop X' mean on the NFS2-3030 and how do I diagnose it?

All NFS2-3030 trouble codes NFS2-3030 panel page