FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
CO TROUBLEtrouble

Notifier NFS2-3030: CO TROUBLE

Notifier NFS2-3030·0 views·0 field notes

What This Code Means

The CO element on a detector is not working properly.

Common Causes

  • 1Internal sensor failure

Resolution Steps

Replace the detector. Note: This trouble is generated for FlashScan mode only.

Manual References(3)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

REMOTE DISPLAY x NO ANSWERThe remote display at address x is not responding.TAMPERA monitor module point programmed with this Type ID code has activated, typically indicating that the module is connected to a tamper switch that has been triggered.STYLE 6 POS LOOP xA short circuit exists on the positive side of SLC loop x.STYLE 4 SHORT x LOOP xA short circuit has been detected on a Style 4 SLC loop.BASIC WALK TESTA Basic Walk Test is currently in progress.

Related Questions

How does the NFW2-100 ground fault detection work?What battery size does the NFW2-100 require, and how do I silence a battery trouble condition after replacement?What batteries does the NFS-320 use, and when is an external battery box required?
All NFS2-3030 trouble codesNFS2-3030 panel page