DISABLEDtrouble

Notifier NFS2-3030: DISABLED

Notifier NFS2-3030·1 view·0 field notes

What This Code Means

The control panel indicates that a specific detector, monitor module, control/relay module, or panel circuit module has been disabled and will not cause an alarm or any Control-by-event activity.

Common Causes

1Manual disablement of a detector, monitor module, or control/relay module
2A zone being disabled, which disables all mapped input and output devices if it is their primary zone
3Manual disablement of a Panel Circuit module

Resolution Steps

Press the ACKNOWLEDGE soft key to silence the panel sounder and switch the SYSTEM TROUBLE LED from flashing to steady. To restore the point to service, access the PROGRAM/ALTER STATUS menu (password required) to re-enable the specific point or zone.

Manual References(5)

1notifierNFS-3030Operations2003Open

2notifierNFS-3030Programming2003Open

3notifierNFS-3030Operating Instructions2002Open

Field Notes

Loading field notes...

Related Codes

REMOTE DISPLAY x TROUBLEThe remote display at address x is reporting a trouble condition.STYLE 4 SHORT x LOOP xA short circuit has been detected on a Style 4 SLC loop.STYLE 6 POS LOOP xA short circuit exists on the positive side of SLC loop x.TAMPERA monitor module point programmed with this Type ID code has activated, typically indicating that the module is connected to a tamper switch that has been triggered.STYLE 6 NEG LOOP xA short circuit exists on the negative side of SLC loop x.