GROUND FAULT LOOP xtrouble

Notifier NFS2-3030: GROUND FAULT LOOP x

Notifier NFS2-3030·1 view·0 field notes

What This Code Means

A ground fault has been detected on SLC loop x.

Common Causes

1Field wiring touching ground
2Moisture in junction boxes
3Damaged cable insulation

Resolution Steps

Check the wiring of loop x for contact with ground. Isolate sections of the loop to locate the fault.

Manual References(3)

1notifierNFS-3030Programming2003Open

2notifierNFS-3030Operations2003Open

3notifierNFS2-3030Operations2016p. 30Open

Field Notes

Loading field notes...

Sign in to share a field note

Related Codes

STYLE 6 POS LOOP xA short circuit exists on the positive side of SLC loop x.REMOTE DISPLAY x NO ANSWERThe remote display at address x is not responding.TAMPERA monitor module point programmed with this Type ID code has activated, typically indicating that the module is connected to a tamper switch that has been triggered.STYLE 4 SHORT x LOOP xA short circuit has been detected on a Style 4 SLC loop.BASIC WALK TESTA Basic Walk Test is currently in progress.

Related Questions

How does the NFW2-100 ground fault detection work?What battery size does the NFW2-100 require, and how do I silence a battery trouble condition after replacement?What batteries does the NFS-320 use, and when is an external battery box required?

All NFS2-3030 trouble codes NFS2-3030 panel page