FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
REMOTE DISPLAY x NO ANSWERtrouble

Notifier NFS2-3030: REMOTE DISPLAY x NO ANSWER

Notifier NFS2-3030·1 view·0 field notes

What This Code Means

The remote display at address x is not responding.

Common Causes

  • 1Wiring fault
  • 2Power loss to display
  • 3Incorrect address

Resolution Steps

Check wiring and power to the remote display at address x.

Manual References(3)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

BASIC WALK TESTA Basic Walk Test is currently in progress.TAMPERA monitor module point programmed with this Type ID code has activated, typically indicating that the module is connected to a tamper switch that has been triggered.STYLE 6 POS LOOP xA short circuit exists on the positive side of SLC loop x.STYLE 4 SHORT x LOOP xA short circuit has been detected on a Style 4 SLC loop.BRAND MISMATCHThe brand of the SLC device is incompatible with the FACP.

Related Questions

How does the NFW2-100 ground fault detection work?What battery size does the NFW2-100 require, and how do I silence a battery trouble condition after replacement?What batteries does the NFS-320 use, and when is an external battery box required?
All NFS2-3030 trouble codesNFS2-3030 panel page