TAMPERsupervisory

Notifier NFS2-3030: TAMPER

Notifier NFS2-3030·1 view·0 field notes

What This Code Means

A monitor module point programmed with this Type ID code has activated, typically indicating that the module is connected to a tamper switch that has been triggered.

Common Causes

1Sprinkler valve tamper switch activation
2Monitor module connected to a tamper switch has been triggered
3Physical tampering with monitored equipment

Resolution Steps

Correct the condition causing the tamper. The Tamper indication will latch until SYSTEM RESET is pushed.

Manual References(6)

1notifierNFS-3030Operations2003Open

2notifierNFS2-3030Operations2016p. 30, 32, 31Open

3notifierNFS-3030Programming2003Open

Field Notes

Loading field notes...

Related Codes

BRAND MISMATCHThe brand of the SLC device is incompatible with the FACP.STYLE 4 SHORT x LOOP xA short circuit has been detected on a Style 4 SLC loop.STYLE 6 POS LOOP xA short circuit exists on the positive side of SLC loop x.BASIC WALK TESTA Basic Walk Test is currently in progress.CONFIGURATIONA problem occurred after sending configuration from PipeIQ to a FAAST detector.