WATERFLOW Ssupervisory

Notifier NFS2-3030: WATERFLOW S

Notifier NFS2-3030·0 views·0 field notes

What This Code Means

A latching supervisory condition indicating that a monitor module set to monitor waterflow (such as a sprinkler system) has been activated.

Common Causes

1Activation of a waterflow switch
2Sprinkler system activation
3Triggering of a monitor module programmed with a waterflow type code

Resolution Steps

Investigate and correct the condition causing the Supervisory. Press the SYSTEM RESET soft key to clear the condition, as WATERFLOW S is a latching type code and will not automatically clear when the condition causing its activation disappears.

Manual References(4)

1notifierNFS-3030Operations2003Open

2notifierNFS2-3030Operations2016p. 30, 31, 32, 34Open

3notifierNFS-3030Programming2003Open

Field Notes

Loading field notes...

Related Codes

REMOTE DISPLAY x NO ANSWERThe remote display at address x is not responding.TAMPERA monitor module point programmed with this Type ID code has activated, typically indicating that the module is connected to a tamper switch that has been triggered.STYLE 6 POS LOOP xA short circuit exists on the positive side of SLC loop x.STYLE 4 SHORT x LOOP xA short circuit has been detected on a Style 4 SLC loop.BASIC WALK TESTA Basic Walk Test is currently in progress.