DBL ADDRtrouble

Silent Knight 5820XL: DBL ADDR

Silent Knight 5820XL·2 views·0 field notes

What This Code Means

An address has been assigned to more than one detector on the SLC loop.

Common Causes

1Duplicate address setting on SLC devices
2Incorrect device addressing during installation

Resolution Steps

Correct the address following the procedure described in Section 5.5 of the installation manual.

Manual References(4)

1silent knight5820XLInstallation2007Open

2silent knight5820XLInstallation2013p. 206Open

3silent knight5820XLDatasheet2006Open

Field Notes

Loading field notes...

Sign in to share a field note

Related Codes

SLC Class A supervision lostThe panel has lost the return path for a Class A SLC loop configuration.Printer offlineThe system printer is not communicating with the control panel.GROUND FAULTAn earth ground fault occurs when the panel senses an unexpected flow of current from one or more of its terminals to the earth connection (Terminal 2).Point disabledA specific point or circuit has been manually taken out of service, preventing it from initiating an alarm or activating an output.SUPERVISORYThe system detects a supervisory condition, which indicates that a monitored device like a tamper switch or duct detector is in an off-normal state.

Related Questions

How do I expand the SK-5207 from 8 zones to 16 zones using the 5210 Zone Expander?What are the key differences between the SK-5207 and its predecessor the SK-5104?How do I program zone assignments and custom zone labels on the Silent Knight 6820?

All 5820XL trouble codes 5820XL panel page