FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
ALARM RESET IN PROGRESSmaintenance

Silent Knight 5820XL: ALARM RESET IN PROGRESS

Silent Knight 5820XL·1 view·0 field notes

What This Code Means

A user-initiated condition where the panel attempts to restore itself to normal operation after an alarm or trouble condition has been cleared.

Common Causes

  • 1RESET button is pressed followed by a valid code
  • 2Rotation of the key after pressing the RESET button
  • 3Activation of an external reset switch
  • 4Completion of a walk test

Resolution Steps

Press RESET and enter your code or rotate the key at the prompt. If an external reset switch has been installed, activating the switch will reset alarms. If you are already using system menus when you press RESET, you will not need to enter your code or rotate the key.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

Printer offlineThe system printer is not communicating with the control panel.Short circuit detected on SLC communication loopA short circuit has been detected on the Signaling Line Circuit wiring.DBL ADDRAn address has been assigned to more than one detector on the SLC loop.SLC Class A supervision lostThe panel has lost the return path for a Class A SLC loop configuration.MissingSLC devices are not being recognized by the control panel, indicating a communication failure with a programmed device.

Related Questions

How do I expand the SK-5207 from 8 zones to 16 zones using the 5210 Zone Expander?What are the key differences between the SK-5207 and its predecessor the SK-5104?How do I program zone assignments and custom zone labels on the Silent Knight 6820?
All 5820XL trouble codes5820XL panel page