DISABLEtrouble

Silent Knight SK-6820: DISABLE

Silent Knight SK-6820·1 view·0 field notes

What This Code Means

A point or circuit has been manually taken out of service, which prevents the activation of notification appliances or alarm initiation from that specific device.

Common Causes

1Manual disablement of a point or circuit by a user
2System maintenance or testing
3Preventing notification appliances from sounding during a test

Resolution Steps

Press ENTER to access Main Menu. Press 2 to select Point Functions. Press 1 or 7 for Disable / Enable Pt. Use the Up or Down button to move through the list. Then press ENTER to select the module where the point you want to disable/enable is located. Enter the point or circuit number that you want to disable/enable. Press the right arrow key to toggle between NORMAL (enable) or DISABLE.

Manual References(3)

1silent knight6820Datasheet2018Open

2silent knight6820Operations2016Open

3silent knight6820/6820EVSInstallation2022p. 149Open

Field Notes

Loading field notes...

Related Codes

An unexpected SLC device has been IDThe panel has detected a device on the SLC loop that was not programmed into the system.Water flow switch alarmA water flow switch has been activated, indicating water movement in the sprinkler system.EVS Supervisory/Tamper AlarmA supervisory or tamper condition related to the Emergency Voice System.AC Power Loss- PanelThe control panel has lost primary AC power.MissingA device or module (such as an SLC device or a 5496, 6815, or 5815XL module) is physically connected to the system but is not being recognized by the panel.