FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
CDAMPER
supervisory

Simplex 4100ES

53 views·0 field notes

What This Code Means

A supervisory condition specifically for a controlled damper.

Common Causes

  • 1Damper failed to reach commanded position

Resolution Steps

Inspect the damper actuator and feedback switches.

Manual References(3)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

Output AbnormalAn output circuit, such as a NAC, is not in its expected electrical state.DIAGNOSTIC LED ACTIVEThe system diagnostic LED is currently active, indicating a diagnostic process is running or a hardware fault is being signaled.Extra DeviceA device is responding at an address that has not been programmed into the system configuration.No Answer/Bad AnswerA programmed device is either not responding or is sending invalid data to the panel.Class A TroubleA break in the wiring has occurred on a Class A (Style 6 or 7) circuit.

Related Questions

What does 'IDNet Extra Device' trouble mean on the 4100ES and how do I resolve it?What is IDNet and how does it differ from other SLC protocols like FlashScan or Signature?How do I connect the 4100ES to a network of other Simplex panels using ES Net?
All 4100ES trouble codes4100ES panel page