FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
DAMPERsupervisory

Simplex 4100ES: DAMPER

Simplex 4100ES·0 views·0 field notes

What This Code Means

A fire or smoke damper is not in its normal operating position.

Common Causes

  • 1Damper closed
  • 2Limit switch failure
  • 3Loss of power to damper motor

Resolution Steps

Check the physical position of the damper and verify the integrity of the limit switch wiring.

Manual References(3)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

WATERWaterflow has been detected in the sprinkler system.SUPERVISORY VERIFICATION GROUP 0 ACTIVESupervisory verification group 0 is currently active and processing a point state change.SUPERVISORY VERIFICATION GROUP 6 ACTIVESupervisory verification group 6 is currently active and processing a point state change.RWATERA water-related supervisory condition has been detected.WATERFLOW MONITOR ZONE ALARMThis condition indicates that a waterflow device connected to a monitor zone has been activated, typically by water moving through the sprinkler system.

Related Questions

What are the NAC circuit specifications for the Simplex 4010ES, and how many notification appliance circuits does it support?How do I troubleshoot a ground fault on the Simplex 4010ES?Can the 4010ES be networked with 4100ES panels on ES Net?
All 4100ES trouble codes4100ES panel page