FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
FIREalarm

Simplex 4100ES: FIRE

Simplex 4100ES·0 views·0 field notes

What This Code Means

A standard fire alarm condition has been triggered.

Common Causes

  • 1Smoke detection
  • 2Heat detection
  • 3Manual pull station activation

Resolution Steps

Follow fire emergency procedures, identify the source of the alarm, and reset the panel once the area is clear.

Manual References(3)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

WATERWaterflow has been detected in the sprinkler system.RECURRING TROUBLE FILTER ACTIVATEDThe system has activated a filter to suppress recurring intermittent trouble signals to prevent nuisance notifications.SUPERVISORY VERIFICATION GROUP 0 ACTIVESupervisory verification group 0 is currently active and processing a point state change.DISABLEDA point has been manually suppressed and will not report alarm conditions or other status changes; the system indicates a trouble condition for each disabled point.RWATERA water-related supervisory condition has been detected.

Related Questions

What are the NAC circuit specifications for the Simplex 4010ES, and how many notification appliance circuits does it support?How do I troubleshoot a ground fault on the Simplex 4010ES?Can the 4010ES be networked with 4100ES panels on ES Net?
All 4100ES trouble codes4100ES panel page