Resource Center Tools

Sign In

Sign In

Home
Resources
Trouble Codes
Simplex
4100es
Idnet Power Monitor Trouble

Resource Center

Browse

Home Questions252 Trouble Codes688 Panels24 Panel Specs24

Learn

Community

Tools

Common Categories

System TroubleSupervisoryGround FaultNACCommunicationPowerDeviceNetwork

Troubleshooting Tip

When diagnosing codes, always check the event history log first. Many trouble conditions are intermittent and tied to environmental factors like temperature or moisture.

Recommended SupplierSponsored

Fire Alarm Parts for Old and New Systems

Panels, detectors, modules and signals
50+ brands, current and legacy
Order by 3 pm ET, ships same day
90-day warranty on every part

Shop Fire Alarm Parts

Can't find what you need?

Resource Center

Questions Panels Trouble Codes Panel Specs NFPA 72-2025

Legal

Privacy Policy Terms of Use Disclaimer DMCA

Cookie Preferences

Company

About Us Blog Glossary Contact Us

© FACP Manuals LLC. All rights reserved.

Built by Will

IDNet Power Monitor Trouble: 4100ES Trouble Code | Fire Alarm Resource Center

IDNet Power Monitor Trouble

trouble

Simplex 4100ES

61 views·0 field notes

What This Code Means

The IDNet card has detected an issue with its internal or loop power monitoring.

Common Causes

1Power supply failure
2Overloaded IDNet loop
3Low voltage

Resolution Steps

Check the IDNet power supply voltage and ensure the loop is not exceeding its current capacity.

Manual References(3)

1simplex4100ES Fire Control UnitsDatasheet2025Open

2simplex4100ESProgramming2011Open

3simplex4100ESInstallation2017p. 12Open

Field Notes

Loading field notes...

Sign in to share a field note

Related Codes

No Answer/Bad AnswerA programmed device is either not responding or is sending invalid data to the panel.Output AbnormalAn output circuit, such as a NAC, is not in its expected electrical state.Extra DeviceA device is responding at an address that has not been programmed into the system configuration.Class A TroubleA break in the wiring has occurred on a Class A (Style 6 or 7) circuit.DIAGNOSTIC LED ACTIVEThe system diagnostic LED is currently active, indicating a diagnostic process is running or a hardware fault is being signaled.

Related Questions

What does 'IDNet Extra Device' trouble mean on the 4100ES and how do I resolve it?What is IDNet and how does it differ from other SLC protocols like FlashScan or Signature?How do I connect the 4100ES to a network of other Simplex panels using ES Net?

All 4100ES trouble codes 4100ES panel page