FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
NOT TSTtrouble

Simplex 4100ES: NOT TST

Simplex 4100ES·0 views·0 field notes

What This Code Means

The TrueAlert ES appliance did not return a test result before the self-test cycle ended.

Common Causes

  • 1Communication timeout
  • 2Test interrupted
  • 3Appliance not activated during silent test

Resolution Steps

Re-run the self-test and ensure the appliance is properly communicating on the IDNAC SLC.

Manual References(3)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

WATERWaterflow has been detected in the sprinkler system.LATSUPVA latching supervisory condition has been detected that requires a manual reset.SUPERVISORY VERIFICATION GROUP 0 ACTIVESupervisory verification group 0 is currently active and processing a point state change.RECURRING TROUBLE FILTER ACTIVATEDThe system has activated a filter to suppress recurring intermittent trouble signals to prevent nuisance notifications.DISABLEDA point has been manually suppressed and will not report alarm conditions or other status changes; the system indicates a trouble condition for each disabled point.

Related Questions

What are the NAC circuit specifications for the Simplex 4010ES, and how many notification appliance circuits does it support?How do I troubleshoot a ground fault on the Simplex 4010ES?Can the 4010ES be networked with 4100ES panels on ES Net?
All 4100ES trouble codes4100ES panel page