FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
WALKTEST
maintenance

Simplex 4100ES

53 views·0 field notes

What This Code Means

The system is currently in a test mode that allows for automatic resetting of alarms.

Common Causes

  • 1Manual initiation of system testing

Resolution Steps

Complete the required testing and exit Walktest mode to return the system to normal operation.

Manual References(3)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

Output AbnormalAn output circuit, such as a NAC, is not in its expected electrical state.DIAGNOSTIC LED ACTIVEThe system diagnostic LED is currently active, indicating a diagnostic process is running or a hardware fault is being signaled.Extra DeviceA device is responding at an address that has not been programmed into the system configuration.No Answer/Bad AnswerA programmed device is either not responding or is sending invalid data to the panel.Class A TroubleA break in the wiring has occurred on a Class A (Style 6 or 7) circuit.

Related Questions

What does 'IDNet Extra Device' trouble mean on the 4100ES and how do I resolve it?What is IDNet and how does it differ from other SLC protocols like FlashScan or Signature?How do I connect the 4100ES to a network of other Simplex panels using ES Net?
All 4100ES trouble codes4100ES panel page