FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
WATERFLOW MONITOR ZONE ALARMalarm

Simplex 4100ES: WATERFLOW MONITOR ZONE ALARM

Simplex 4100ES·0 views·0 field notes

What This Code Means

This condition indicates that a waterflow device connected to a monitor zone has been activated, typically by water moving through the sprinkler system.

Common Causes

  • 1Activation of a waterflow switch
  • 2Short circuit on the monitor zone
  • 3Current limited condition on the circuit

Resolution Steps

For hardwired zones, this point type is used when only waterflow devices are connected to the circuit. This point type is also used when the waterflow device is connected to an IDNet Zone Addressable Module (ZAM). Shorts and current limited conditions are treated the same (activate alarms).

Manual References(3)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

LOG CLEARED TROUBLES GLOBAL ACKIndicates that cleared troubles have been globally acknowledged in the system log.RWATERA water-related supervisory condition has been detected.CO 12 MONTH ALMOST EXPIRED LOG ENABLEThe Carbon Monoxide (CO) sensor is approximately 12 months away from its expiration date.SUPERVISORY VERIFICATION GROUP 0 ACTIVESupervisory verification group 0 is currently active and processing a point state change.BMUX OVERRIDE POLL FAILED TRANSPONDERSThe system failed to poll transponders during a BMUX override condition.

Related Questions

What are the NAC circuit specifications for the Simplex 4010ES, and how many notification appliance circuits does it support?How do I troubleshoot a ground fault on the Simplex 4010ES?How do I troubleshoot a ground fault on the Simplex 4100ES using the Earth Fault Search?
All 4100ES trouble codes4100ES panel page