How do I access the front-panel programming menu on the FX-10 to change IDC zone types?

To access the programming menu on an FX-10, you must install a jumper on the J3 (PRG) pins on the main circuit board (Page 31) [1].

Once in local program mode, use the front-panel buttons to navigate to the IDC Zone Type settings. 1. Install the jumper on J3 (PRG); the panel status LEDs will flash to indicate local program mode is active. 2. Enter the passcode if prompted. 3. Use the Signal Silence & Alarm On button to scroll through options until you reach the IDC Zone Type option (Step 11). 4. Press the Disable button for the specific IDC you wish to configure; the panel will turn on that IDC's trouble LED to indicate it is selected. 5. Enter the desired zone type value, such as Alarm-unverified or WaterFlow. 6. Remove the jumper from J3 (PRG) to save settings and exit; the panel will automatically reset (Page 31, 38) [1].