How do I navigate the FENWALNET 6000 panel interface to view active alarms, troubles, and supervisory conditions?
To navigate the FENWALNET 6000 interface, open the control unit door to access the operator keys and use the <SCROLL> key to cycle through active events (Page 70, 138) [1].
For specific lists or suppressed events, use the List-Menu by pressing 0 and entering your password (Page 89) [1].
Direct Scrolling After acknowledging events, press the <SCROLL> key to cycle through active alarms, troubles, or supervisory conditions in order of occurrence (Page 138, 145) [1].
A summary of the total number of active events appears at the end of the cycle (Page 136) [1].
Note that supervisory and trouble events will only scroll if there are no active pre-alarms or alarm verifications (Page 154) [1].
Menu Navigation To view specific event lists, including those suppressed by higher-priority events (Page 89) [1]:
-
Press 0, enter your Password, and press <ENTER> (Page 90) [1].
-
Press 2 for the List-Menu (Page 90) [1].
-
Press <SCROLL> then press 4 for Active Events (Page 90) [1].
-
Select the event type:** 1** (Pre-Alarm), 2 (Alarm), 3 (Supervisory), or 4 (Trouble) (Page 90) [1].
-
Press <SCROLL> to move through the list and <BACKSPACE> to exit (Page 90) [1].