To perform a Fire Drill, enter your Security Code + [#] + 69 from a Partition 1 keypad. To perform a Burglary Walk Test, enter your Security Code + 5 (TEST) while the system is disarmed.
Fire Drill Procedure
Ensure the burglary portion of the system is disarmed (Page 58) [1].
From a Partition 1 keypad, enter your Security Code + [#] + 69 (Page 58) [1].
The keypad will display "FIRE DRILL ACTIVE" while the notification appliance circuits are activated (Page 58) [1].
To stop the test, enter any Security Code + 1 (OFF) (Page 58) [1].
Burglary Walk Test Procedure
Disarm the system and close all protected windows and doors (Page 56) [1].
Enter your Security Code + 5 (TEST). The external sounder should sound for 3 seconds (Page 56) [1].
Open each protected door/window and walk in front of motion detectors. The keypad should beep three times for each activated point (Page 57) [1].
To exit Test mode, enter your Security Code + 1 (OFF) (Page 56) [1].
For fire sensors, follow the manufacturer's instructions to trigger each smoke detector and verify that the zone identification number appears on the keypad display (Page 57) [1].
