How do I program the 4010ES using the ES Panel Programmer?
To program the 4010ES, connect a PC to the panel and use the ES Panel Programmer software to configure hardware and point logic. 1. Connect a laptop to the Ethernet service port (J7) on the CPU card or the front panel connection using a standard straight Ethernet cable (Page 74) [1].
-
Launch the ES Panel Programmer software (Page 42) [1].
-
Use the Hardware tab to select system components, such as the CPU or 48-LED Module, and modify their properties (Page 88, 90) [1].
-
Create Annunciation Zone Lists under the List tab to group initiating devices by physical area (Page 88) [1].
-
Assign Point Types and Modes (e.g., FIRE or TROUBLE) to specific hardware points in the Point Editing tab (Page 88, 91) [1].
-
Download the configuration file to the CPU via the Ethernet or serial connection (Page 74) [1].