To program the built-in DACT, enter the Master Programming Level and navigate to the Option Module Screen. You must enable the hardware, configure phone line settings, and provide central station account information. 1. Enable DACT: Select 2 for On Board DACT from the Option Module Screen, then press 1 to set Enabled to "Yes" (Page 93) [1].
Set Phone Type: From On Board DACT Screen #1, select 2 for Primary Phone or 3 for Secondary Phone, then choose 1 for Touchtone or 2/3 for Rotary (Page 94) [1].
Enable Reporting: Navigate to On Board DACT Screen #2, select 2 for Central Station, and press 1 to set Reporting Enabled (Page 98) [1].
Enter Account Code and Test Time: From Primary/Secondary Screen #1, select 2 to enter the 4-character Account Code and 3 to set the 24 Hour Test Time in military format (Page 101) [1].
Program Phone Number: From Primary/Secondary Screen #2, select 1 to enter the central station Phone Number (up to 20 digits) (Page 101) [1].
Select Format and Style: Choose the Communication Format (e.g., Ademco Contact ID) from Primary/Secondary Screen #3 and toggle the Report Style between Point or Zone on Central Station Screen #2 (Page 103, 111) [1].
