What are the steps to set up the CLSS Gateway on the N16 for cloud connectivity and remote programming?

To set up the CLSS Gateway (CGW-MB) for cloud connectivity and remote programming, you must physically install the module and activate the required cloud services. Remote programming specifically requires the panel to be in Service Mode with a technician present on-site (Page 71) [1].

\n\n1. Mount the Hardware: Install the CGW-MB onto a CHS-CGW chassis, which must be mounted on the far right side of the N16 chassis in the last position (Page 31) [1].

\n2. Connect the NUP Cable: Connect the gateway to the FACP using a NUP-to-NUP cable (Page 31) [1].

\n3. Acquire Licenses: Log on to the CLSS website (www.fire.honeywell.com) to purchase the necessary tokens and VeriFire Tools licenses (Page 5) [1].

\n4. Configure the Gateway: Program the CGW-MB according to the instructions in the CLSS Gateway Manual (LS10248-000HW-E) (Page 31) [1].

\n5. Activate Remote Access: To perform remote programming, navigate to the panel's Settings screen and enter Service Mode (Page 71, 73) [1].