What is the procedure to program individual NAC circuits on the FX-10 for Genesis protocol versus standard temporal output?

To program NAC circuits on the FX-10, you must access the panel programming menu and assign specific values to the NAC Type option for each circuit.

1. Enter the programming menu and select the NAC Type option (Step 21) (Page 42) [1].

2. Identify the NAC being programmed by its Trouble LED; while NAC 1 is selected by default, you can select a different NAC by pressing that circuit's Disable button (Page 41) [1].

3. To configure Genesis protocol, select GENESIS for synchronized continuous signals with horn-only silence, or GENESIS (AV Sil) if both horns and strobes must be silenced (Page 41) [1].

4. To configure Standard Temporal, select Temporal (3-3-3), which outputs an unsynchronized 24-volt temporal signal for appliances designed to output a steady tone (Page 41) [1].

5. Enter the value for each NAC before proceeding to the next programming option (Page 41) [1].