FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
Loop 1 uncfgrd alarm
alarm

Edwards EST iO64

50 views·0 field notes

What This Code Means

A device on loop 1 that is not programmed went into alarm.

Common Causes

  • 1Unprogrammed device activation
  • 2Incorrect device address
  • 3New device added without configuration

Resolution Steps

Identify the unprogrammed device on loop 1 and either program it into the system database or remove it from the loop.

Manual References(1)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

Loop 1 map mismatchThe loop 1 map in RAM and the loop 1 map in the database do not match.Dialer line 1 faultA ground fault or line fault was detected on line 1 of the dialer.Ground faultThe panel detected a ground fault.AC powerThere is a problem with the panel’s AC power.Waterflow activeA waterflow condition has been detected, indicating water movement in the sprinkler system.

Related Questions

How do I wire SLC loops on the iO64 for Class A and Class B?How do I add a remote annunciator or display to the iO64?How do I perform a walk test on the iO64?
All iO64 trouble codesiO64 panel page