FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
Loop 1 uncfgrd troubletrouble

Edwards EST iO64: Loop 1 uncfgrd trouble

Edwards EST iO64·0 views·0 field notes

What This Code Means

A device on loop 1 that is not programmed went into trouble.

Common Causes

  • 1Unprogrammed device fault
  • 2Address mismatch
  • 3Device failure before commissioning

Resolution Steps

Locate the unprogrammed device on loop 1 and address the trouble condition or configure the device in the panel.

Manual References(1)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

Loop 1 map mismatchThe loop 1 map in RAM and the loop 1 map in the database do not match.Loop 1 device 000A device on loop 1 has an address set to zero.Internal faultThe control panel detected an internal hardware or software error.Ground faultThe panel detected a ground fault.Zone maintenance alertA maintenance alert was detected for a zone.

Related Questions

What are the battery sizing requirements for the EST4, and what is the replacement procedure?How many addressable devices can an EST3 node support, and what cards provide the SLC loops?How do I decode an EST3 trouble address like '03030681'?
All iO64 trouble codesiO64 panel page