FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
Loop 1 over limitstrouble

Edwards EST iO64: Loop 1 over limits

Edwards EST iO64·0 views·0 field notes

What This Code Means

There are too many devices on loop 1.

Common Causes

  • 1Exceeded device capacity
  • 2Incorrect mapping data

Resolution Steps

Reduce the number of devices on loop 1 to stay within the panel's maximum supported device count.

Manual References(1)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

Zone maintenance alertA maintenance alert was detected for a zone.NAC 1 troubleAn open or short was detected on NAC 1 or there is a problem with the EOL.Ground faultThe panel detected a ground fault.Loop 1 device 000A device on loop 1 has an address set to zero.Dialer delivery failThe dialer failed to deliver a message to the receiver.

Related Questions

What are the battery sizing requirements for the EST4, and what is the replacement procedure?How many addressable devices can an EST3 node support, and what cards provide the SLC loops?How do I decode an EST3 trouble address like '03030681'?
All iO64 trouble codesiO64 panel page