FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
Loop 1 device 000trouble

Edwards EST iO64: Loop 1 device 000

Edwards EST iO64·1 view·0 field notes

What This Code Means

A device on loop 1 has an address set to zero.

Common Causes

  • 1New device not addressed
  • 2Address dial slipped
  • 3Incorrectly addressed replacement device

Resolution Steps

Locate the device on loop 1 and set its address to a valid non-zero value using the rotary switches.

Manual References(1)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

Ground faultThe panel detected a ground fault.Loop 1 uncfgrd troubleA device on loop 1 that is not programmed went into trouble.Aux power 1The control panel detected a trouble condition on the continuous AUX power circuit 1.Internal faultThe control panel detected an internal hardware or software error.Loop 1 map mismatchThe loop 1 map in RAM and the loop 1 map in the database do not match.

Related Questions

What are the battery sizing requirements for the EST4, and what is the replacement procedure?How many addressable devices can an EST3 node support, and what cards provide the SLC loops?How do I decode an EST3 trouble address like '03030681'?
All iO64 trouble codesiO64 panel page