FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
Battery chargertrouble

Edwards EST iO64: Battery charger

Edwards EST iO64·0 views·0 field notes

What This Code Means

The panel detected a battery charger trouble condition; the charger may not be able to charge the batteries.

Common Causes

  • 1Failed charging circuit
  • 2Blown fuse
  • 3Extremely discharged batteries

Resolution Steps

Check battery charging voltage; if the charger has failed, the panel electronics may need replacement.

Manual References(1)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

Loop 1 device 000A device on loop 1 has an address set to zero.Ground faultThe panel detected a ground fault.Loop 1 uncfgrd alarmA device on loop 1 that is not programmed went into alarm.Internal faultThe control panel detected an internal hardware or software error.Aux power 1The control panel detected a trouble condition on the continuous AUX power circuit 1.

Related Questions

What are the battery sizing requirements for the EST4, and what is the replacement procedure?How many addressable devices can an EST3 node support, and what cards provide the SLC loops?How do I decode an EST3 trouble address like '03030681'?
All iO64 trouble codesiO64 panel page