FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
Aux power 2trouble

Edwards EST iO64: Aux power 2

Edwards EST iO64·0 views·0 field notes

What This Code Means

The control panel detected a trouble condition on the resettable AUX power circuit 2.

Common Causes

  • 1Overload condition
  • 2Short circuit on AUX 2
  • 3Device failure

Resolution Steps

Check devices powered by AUX 2 for shorts; perform a system reset to clear the resettable power circuit.

Manual References(1)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

Loop 1 device 000A device on loop 1 has an address set to zero.Zone maintenance alertA maintenance alert was detected for a zone.Internal faultThe control panel detected an internal hardware or software error.Ground faultThe panel detected a ground fault.NAC 1 troubleAn open or short was detected on NAC 1 or there is a problem with the EOL.

Related Questions

What are the battery sizing requirements for the EST4, and what is the replacement procedure?How many addressable devices can an EST3 node support, and what cards provide the SLC loops?How do I decode an EST3 trouble address like '03030681'?
All iO64 trouble codesiO64 panel page