FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
Supervisory activesupervisory

Edwards EST iO64: Supervisory active

Edwards EST iO64·0 views·0 field notes

What This Code Means

A supervisory condition has been detected by the system.

Common Causes

  • 1Tamper switch activation
  • 2Valve closure
  • 3Pressure switch activation

Resolution Steps

Investigate the specific device in supervisory and restore it to its normal state.

Manual References(1)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

Zone maintenance alertA maintenance alert was detected for a zone.Loop 1 device 000A device on loop 1 has an address set to zero.Ground faultThe panel detected a ground fault.Battery missingThe battery is no longer connected.Internal faultThe control panel detected an internal hardware or software error.

Related Questions

What are the battery sizing requirements for the EST4, and what is the replacement procedure?How many addressable devices can an EST3 node support, and what cards provide the SLC loops?How do I decode an EST3 trouble address like '03030681'?
All iO64 trouble codesiO64 panel page