FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
ENTER START WALKTESTmaintenance

Fire-Lite MS-9200UDLS: ENTER START WALKTEST

Fire-Lite MS-9200UDLS·1 view·0 field notes

What This Code Means

The panel is in Walktest mode, which is an off-normal condition.

Common Causes

  • 1User initiated system testing

Resolution Steps

Complete the walktest and exit the test mode to return the panel to normal operation.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

PROCESS MONA monitor module assigned to process monitoring has been activated.WATERFLOWA condition indicating that water is flowing through the fire sprinkler system, typically detected by a monitor module or waterflow circuit.RESET IN SYSTEMThis condition indicates the system is undergoing a reset process to clear latched alarms and troubles, reset power to 4-wire detectors, and perform a lamp test.TELCO LINE 2The panel has detected a loss of voltage or failure on telephone line 2.NAC_KEY_FLTA fault related to the internal NAC activation logic or hardware.

Related Questions

How do I set zone types on the MS-5024?What is the maximum SLC loop capacity of the MS-5024, and which Fire-Lite detectors and modules are compatible?How do I troubleshoot a Loop Fault or SLC Communication Failure on the MS-5024?
All MS-9200UDLS trouble codesMS-9200UDLS panel page