FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
MON SUPERVISORYsupervisory

Fire-Lite MS-9200UDLS: MON SUPERVISORY

Fire-Lite MS-9200UDLS·2 views·0 field notes

What This Code Means

A monitor module programmed for supervisory operation has been activated.

Common Causes

  • 1Supervisory switch activation
  • 2Wiring fault on the monitor input
  • 3Incorrect EOL resistor

Resolution Steps

Check the device connected to the monitor module to ensure it is in the normal position.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

PROCESS MONA monitor module assigned to process monitoring has been activated.POWER MONA monitor module assigned to power monitoring has detected a loss of power.REMOTE SYNC FAULTA fault has been detected on the remote synchronization output circuit.WATERFLOWA condition indicating that water is flowing through the fire sprinkler system, typically detected by a monitor module or waterflow circuit.TELCO LINE 2The panel has detected a loss of voltage or failure on telephone line 2.

Related Questions

How do I set zone types on the MS-5024?What is the maximum SLC loop capacity of the MS-5024, and which Fire-Lite detectors and modules are compatible?How do I troubleshoot a Loop Fault or SLC Communication Failure on the MS-5024?
All MS-9200UDLS trouble codesMS-9200UDLS panel page