FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
NAC 1 FAULTtrouble

Fire-Lite MS-9200UDLS: NAC 1 FAULT

Fire-Lite MS-9200UDLS·2 views·0 field notes

What This Code Means

A fault condition (open or short) has been detected on Notification Appliance Circuit 1.

Common Causes

  • 1Missing 4.7K ohm EOL resistor
  • 2Broken circuit wiring
  • 3Short in a notification appliance

Resolution Steps

Check for the presence of the 4.7K ohm EOL resistor at the end of the circuit. Inspect wiring for opens or shorts.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

NAC_KEY_FLTA fault related to the internal NAC activation logic or hardware.OFF_NORMAL_MESSAGEThe system is in a state other than normal standby, such as programming or test mode.TELCO LINE 2The panel has detected a loss of voltage or failure on telephone line 2.UPDOWN FAILUREA failure occurred during a programming upload or download session.REMOTE SYNC FAULTA fault has been detected on the remote synchronization output circuit.

Related Questions

How do I set zone types on the MS-5024?What is the maximum SLC loop capacity of the MS-5024, and which Fire-Lite detectors and modules are compatible?How do I troubleshoot a Loop Fault or SLC Communication Failure on the MS-5024?
All MS-9200UDLS trouble codesMS-9200UDLS panel page