FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
NO_DEVICES_INSTLLDtrouble

Fire-Lite MS-9200UDLS: NO_DEVICES_INSTLLD

Fire-Lite MS-9200UDLS·1 view·0 field notes

What This Code Means

The panel is programmed for addressable devices but does not detect any on the SLC loop.

Common Causes

  • 1SLC loop not connected
  • 2Total SLC loop failure
  • 3No devices have been addressed

Resolution Steps

Verify the SLC loop wiring is connected to the panel. Check that devices are properly addressed and installed on the loop.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

PROCESS MONA monitor module assigned to process monitoring has been activated.MON SUPERVISORYA monitor module programmed for supervisory operation has been activated.REMOTE SYNC FAULTA fault has been detected on the remote synchronization output circuit.POWER MONA monitor module assigned to power monitoring has detected a loss of power.AC LOSSThe panel has detected that the primary AC power has dropped too low or failed, causing the AC POWER indicator to extinguish and the system trouble indicator to activate.

Related Questions

How do I set zone types on the MS-5024?What is the maximum SLC loop capacity of the MS-5024, and which Fire-Lite detectors and modules are compatible?How do I troubleshoot a Loop Fault or SLC Communication Failure on the MS-5024?
All MS-9200UDLS trouble codesMS-9200UDLS panel page