FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
OFF_NORMAL_MESSAGEtrouble

Fire-Lite MS-9200UDLS: OFF_NORMAL_MESSAGE

Fire-Lite MS-9200UDLS·2 views·0 field notes

What This Code Means

The system is in a state other than normal standby, such as programming or test mode.

Common Causes

  • 1Panel is in programming mode
  • 2Walktest is active
  • 3System is disabled

Resolution Steps

Exit any active programming or test menus to return the system to its normal operating state.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

REMOTE SYNC FAULTA fault has been detected on the remote synchronization output circuit.POWER MONA monitor module assigned to power monitoring has detected a loss of power.NAC_KEY_FLTA fault related to the internal NAC activation logic or hardware.TELCO LINE 2The panel has detected a loss of voltage or failure on telephone line 2.PROCESS MONA monitor module assigned to process monitoring has been activated.

Related Questions

How do I set zone types on the MS-5024?How do I troubleshoot a Loop Fault or SLC Communication Failure on the MS-5024?How do I perform a walk test on the MS-5024 without triggering a full alarm?
All MS-9200UDLS trouble codesMS-9200UDLS panel page