FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
POWER MONsupervisory

Fire-Lite MS-9200UDLS: POWER MON

Fire-Lite MS-9200UDLS·2 views·0 field notes

What This Code Means

A monitor module assigned to power monitoring has detected a loss of power.

Common Causes

  • 1External power supply failure
  • 2Blown fuse on monitored equipment
  • 3Wiring fault

Resolution Steps

Check the status of the external power supply being monitored by the module.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

PROCESS MONA monitor module assigned to process monitoring has been activated.REMOTE SYNC FAULTA fault has been detected on the remote synchronization output circuit.WATERFLOWA condition indicating that water is flowing through the fire sprinkler system, typically detected by a monitor module or waterflow circuit.TELCO LINE 2The panel has detected a loss of voltage or failure on telephone line 2.RESET IN SYSTEMThis condition indicates the system is undergoing a reset process to clear latched alarms and troubles, reset power to 4-wire detectors, and perform a lamp test.

Related Questions

How do I set zone types on the MS-5024?What is the maximum SLC loop capacity of the MS-5024, and which Fire-Lite detectors and modules are compatible?How do I troubleshoot a Loop Fault or SLC Communication Failure on the MS-5024?
All MS-9200UDLS trouble codesMS-9200UDLS panel page