FACP Manuals Logo
FACPManuals
Ask AI
Ask AI
PROCESS MONsupervisory

Fire-Lite MS-9200UDLS: PROCESS MON

Fire-Lite MS-9200UDLS·2 views·0 field notes

What This Code Means

A monitor module assigned to process monitoring has been activated.

Common Causes

  • 1Change in monitored industrial process
  • 2Equipment status change
  • 3Input activation

Resolution Steps

Verify the status of the equipment or process being monitored by the module.

Manual References(5)

Field Notes

Loading field notes...
Sign in to share a field note

Related Codes

NAC_KEY_FLTA fault related to the internal NAC activation logic or hardware.UPDOWN FAILUREA failure occurred during a programming upload or download session.RESET IN SYSTEMThis condition indicates the system is undergoing a reset process to clear latched alarms and troubles, reset power to 4-wire detectors, and perform a lamp test.TELCO LINE 2The panel has detected a loss of voltage or failure on telephone line 2.NAC 3 FAULTA fault condition (open or short) has been detected on Notification Appliance Circuit 3.

Related Questions

How do I set zone types on the MS-5024?What is the maximum SLC loop capacity of the MS-5024, and which Fire-Lite detectors and modules are compatible?How do I troubleshoot a Loop Fault or SLC Communication Failure on the MS-5024?
All MS-9200UDLS trouble codesMS-9200UDLS panel page